The following Terms and Conditions of Sale (“Terms and Conditions”) shall apply to all sales made by Precision Dynamics Corporation (“Supplier”) to a buyer of Supplier’s goods (“Purchaser”), and every agreement or other undertaking by Supplier is expressly conditioned on Purchaser’s assent to these Terms and Conditions.

Products and Prices

Products, prices, and terms and conditions are subject to change without notice. Customers will be notified of any such applicable charges due to changes in products, prices or terms when orders are placed.

 

Custom Cancellation Fee

All custom orders are considered firm once proof is approved and in production and cannot be canceled without authorization. In such a case, a minimum $50.00 cancellation charge may be charged and all related pre-production costs will be invoiced.

 

Acceptance of Orders

A quotation or tender addressed to Purchaser from Supplier does not constitute an offer to sell, and in no circumstances shall any contract arise unless and until the Purchaser submits an order to Supplier, and Supplier issues a written acknowledgment of the order to the Purchaser. PDC shall not be obligated to accept purchase orders that are less than a $100 minimum order value, before tax and freight. PDC reserves the right to refuse any orders that do not meet the $100 minimum value amount. Online orders do not need to meet a minimum order value.

 

Order Cancellation

In the event Purchaser desires to cancel an order, Supplier may accept such cancellation in its sole discretion, however such cancellation, modification, or suspension of order will not be accepted on terms that will not fully indemnify Supplier against its loss, including recovery of all direct costs incurred, including normal indirect and overhead charges.

 

Custom Cancellation

All custom orders are considered firm once the Purchaser's order has been acknowledged by the Supplier or if the order from the Supplier was contingent on an approved proof, once the order is acknowledged and the proof approved. Cancelled custom orders may be fully charged by the Supplier, or at the sole discretion of the Supplier may be reduced to all related pre-production costs with a minimum charge of $50.

 

Inspection/Acceptance

In the absence of an appropriate written notice with full particulars of any deficiency in the quality or quantity of the goods, Purchaser shall be conclusively deemed to have inspected and accepted the goods within sixty(60) days after goods are invoiced. Returns will not be accepted after 60 days from the date of issue of the original invoice.

 

Returns

Purchaser may not return any goods, under warranty claim or otherwise, without first reporting to Supplier the reasons for such return and first obtaining and then observing such reasonable instructions as Supplier may give in authorizing any return.

The following conditions apply to all returns:

• All returned products must be in salable condition, unused and in the unopened package and/or carton in which originally purchased
• Custom products and discontinued products are not eligible for return
• Credit will be issued at Supplier’s original invoice price
• All returns must be shipped freight prepaid by Purchaser
• Where Supplier determines that it was the cause of the return, Supplier will ground freight the return.
• All stock products need to be returned within 30 days of authorization or the return will be rejected.

Supplier reserves the right:

• To return to Purchaser at Purchaser’s cost returned product which in Supplier’s sole discretion does not meet acceptable physical condition standards; and
• To request proof of purchase for returned products

 

Restocking Charges

All non-warranty return claims approved by Supplier in its discretion are subject to a restocking fee equal to 15% of the total value of the requested return.

 

Damaged Shipments

All merchandise is inspected, weighed, and carefully packed for shipment before leaving any of Supplier’s warehouses. The freight company accepts liability when the shipment leaves our facility. Upon delivery of your shipment, promptly check the number and condition of cartons against the Bill of Lading totals before signing the freight Bill of Lading.If the Purchaser’s account was used to ship the product and damage or loss is discovered, Purchaser is responsible for filing a claim with the freight carrier. If the Supplier’s account was used to ship the product and damage or loss is discovered, supplier would be responsible for filing a claim with the freight carrier.

 

International Orders

Payment in advance in U.S. dollars is required. We will only accept a line of credit or wire transfers. All charges associated with freight, export handling, and specifics of a freight forwarder maybe modified by the Supplier unless otherwise agreed in writing. Because such orders are being exported from the United States in accordance with Export Administration Regulations, diversion contrary to U.S. law is prohibited.

 

Shipping Methods

By UPS Ground Service or common carrier unless otherwise requested. Rush Shipments By your carrier choice and at your expense and approval.

 

Partial Shipments

We will ship partial orders to speed-up delivery to customers unless told otherwise. If you require your order to ship complete please notify Customer Service while placing your order.

 

Price/Delivery Terms

Unless otherwise stated in writing, price and delivery terms are F.O.B. site of shipment, as defined in Incoterms 2020, and such prices do not include sales, use or other taxes or any export package cost, transportation, freight handling charges, export/import license fee, customs duties and the like, all of which shall be paid by Purchaser, who shall indemnify Supplier against all claims and liabilities therefor. Unless otherwise specified in writing, delivery dates are estimates only, and Supplier shall not be liable for any damages, consequential or otherwise, resulting from the failure to deliver the goods by a particular date.

 

Payment/Security

Unless otherwise stated in writing, payment terms are thirty (30) days from the date of the invoice for customers with satisfactory credit. In the event payment is not received within forty-five (45) days of the invoice date a five percent (5%) penalty shall be due. For each subsequent thirty (30) days period from the date the penalty is assessed, interest shall accrue at the rate of one and one-half percent (1.5%) on the unpaid portion of the invoice for each period of thirty (30) days from the due date. Purchaser shall be liable for Supplier’s costs associated with the collection of any amounts past due, including but not limited to attorneys’ fees and court costs. Supplier retains title/security interest in the goods until full payment.

Payment must be made by such means as Supplier may specify, such as by check or electronic funds transfer, provided that Supplier may refuse, in its sole discretion, payment by any means, including, without limitation, credit cards.

Whenever Purchaser becomes insolvent or Supplier in good faith requires security, Supplier may cancel any outstanding contract with Purchaser; revoke any extension of credit to Purchaser; reduce any unpaid debt by enforcing its security interest in all goods (and proceeds therefrom) furnished by Supplier to Purchaser; and take any other steps necessary or desirable to secure Supplier fully with respect to Purchaser’s payment for goods furnished or to be furnished by Supplier.

 

Resale Certificate

A current Resale Certificate and tax exempt form must be submitted and “on file” prior to processing your initial order.

 

Methods of Payment

• C.O.D orders: By money order or certified check only. Subsequent C.O.D. orders may be paid by company check, with pre-approval of our Credit Department
• Credit Card: Visa, MasterCard, and American Express are accepted on point of sale transactions
• Open Account: Payments made after 30 days may be subject to interest

 

Returned Checks

There is a $20.00 service charge for each check returned for any reason.

 

Artwork Specifications

Modifications to artwork will be quoted on a per order basis. A minimum charge applies. (No photocopies or faxes). The following computer files are acceptable: Adobe Illustrator latest version or less – files saves as .tiff, .bmp, .jpg, .psd or .gif – minimum DPI 150 – logos from websites are NOT acceptable. We also accept Corel Draw, PageMaker, and QuarkXPress files. Please specify the name and type of the files being sent. Please DO NOT embed files in a Microsoft Word file. Also include a color copy for color breakdown only. Pre-production custom-imprinted samples are available. Logos, Trademarks or Designs shown do not imply any endorsement by their owner but are simply to exhibit factory printing capabilities.

 

Right to Reject

Supplier has the sole discretion to reject any order that in its opinion contains unlawful content, sexual content, pornography, nudity, libelous content, defamatory content , obscene content, profane content , that portrays the irresponsible use of alcohol or other substances, content advocating for persecution based on gender, age, race, religion, disability or national origin, or content that is otherwise inappropriate for Supplier production (“Salacious Content”).

You agree to not use the Supplier to create any good that features Salacious Content or that infringes on any patent, trademark, trade secret, copyright or other proprietary rights of any third party.

 

Content and Design

Purchaser will retain ownership of any submitted designs, and you grant us and our designees a worldwide, non-exclusive, transferable, royalty-free, perpetual irrevocable right and license, with right of sublicense (through multiple tiers), to use, reproduce, distribute (through multiple tiers), create derivative works of and publicly display such designs solely in connection with the production or provision of any product or service you request or to show you how your designs would appear in our products or services

Purchaser represents and warranties that Purchaser owns or otherwise possesses all the necessary rights with respect to the designs, and that the designs do not and will not infringe, misappropriate, use or disclose without authorization or otherwise violate any copyright, trademark, service mark, trade secret right or other intellectual property or other property right of any third party, invade or otherwise violate the privacy and/or publicity rights of any individual, violate any laws or contain Salacious Content.

Purchaser represents that they have obtained the written consent, release, and permission of every identifiable individual who appears in any submitted design to use such individual's likeness and, if any such identifiable individual is under the age of eighteen (18), Purchaser has obtained such written consent, release and permission from such individual's parent or guardian (and Purchaser agrees to provide Supplier with a copy of any such consents, releases and permissions upon Supplier’s request). If Purchaser does submit a submission that contains the likeness of an identifiable individual under the age of eighteen (18), Supplier strongly encourages not to include any identifying information (such as the individual's name or address) with such design.

All designs that Purchaser provides are automatically stored by the Supplier. Providing a design to Supplier does not mean that such Design is in compliance with these Terms and Conditions. Supplier does not review any designs before Purchaser provides them. By providing designs to the Supplier, the Purchaser assumes full responsibility for all such designs and for compliance with these Terms and Conditions.

 

Limited Warranty

Except as to breakaway lanyards (addressed below), Supplier warrants that all goods will be free from defects in materials and workmanship for a period of six (6) months for non-assembled goods and twelve (12) months for assembled goods at the time of delivery by Supplier (“Limited Warranty”).

The Limited Warranty and Limited Breakaway Warranty do not apply if (1) the defect is the result of use or handling of the goods in a manner, circumstances or purposes other than those approved or instructed by Supplier; or (2) the goods are misused or abused or there is evidence of tampering, mishandling, neglect, accidental damages, modification or repair without the approval of Supplier.

The limited warranties provided herein are in lieu of all other warranties, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose. The limited warranty and limited breakaway warranty are in lieu of any other liability or obligation of supplier for losses, expenses, inconveniences or damages (whether special, indirect, secondary, or consequential) arising from ownership or use of the goods. Repair , replacement, or credit (at supplier’s option) upon return of the goods is purchaser’s sole remedy for any such losses, expenses, inconveniences or damages. Purchaser hereby waives any rights that it might otherwise be entitled to in connection with the matters covered in this paragraph.

SPECIAL WARNING FOR BREAKAWAY LANYARDS Breakaway performance will vary and lanyards will not break away under all conditions. The male/female part pull force specification for round breakaways is 3-11 lbs under tested conditions per M-3-QA-0167. The male/female part pull force specification for flat breakaways is 4-10 lbs under test conditions per M-3-QA-0167. A full description of the M-3-QA-0167 test procedure can be provided upon request. Not recommended for use around moving objects or playgrounds.

 

Limited Breakaway Warranty

Breakaway performance will vary and lanyards will not break away under all conditions. Customers should test the breakaway feature for suitability for their use and environment. This product is subject to a limited warranty. Seller warrants to the original purchaser for use that the goods or any component thereof will be free from defects in workmanship for a period of one (1) year from the date of purchase. Seller’s sole liability and the purchaser’s sole remedy for a failure of goods under this limited warranty, and for any and all claims arising out of the purchase and use of the goods, shall be limited to the repair or replacement of the goods that do not conform to this warranty. There are no express or implied warranties covering these goods other than as set forth herein.

 

No Consequential Damages

Under no circumstances whatsoever shall Supplier be liable to Purchaser for any indirect, special, or consequential damages, whether foreseeable or unforeseeable and whether based upon lost goodwill, lost resale profits, loss of use of money, work stoppage, impairment of other assets, or otherwise and whether arising out of breach of warranty, breach of contract, strict liability in tort, negligence, misrepresentation, or otherwise, except only in the case of personal injury where applicable law requires such liability.

 

Patent, Copyright and Trademark Indemnity

In the event that a good supplied by Supplier is claimed to directly infringe a United States patent, copyright or trademark or a foreign patent, copyright or trademark corresponding thereto in effect at the time Supplier issues its invoice or written acknowledgment of the order, then Purchaser shall permit Supplier, at its option and expense, either to (1) procure the right to continue to use such good, (2) replace or modify such good so that the good supplied becomes non-infringing, or (3) accept return of such good and reimburse Purchaser for the purchaser price, less a charge for reasonable wear and depreciation.

Supplier shall at its expense defend any action against Purchaser based on a claim that a good infringes a United States patent, copyright or trademark or a foreign patent, copyright or trademark corresponding thereto, provided that Purchaser: (1) notifies Supplier promptly in writing of such action, and furnishes copies of all demands, process and pleadings; (2) gives Supplier sole control of the defense thereof (and any negotiations for settlement or compromise thereof); and (3) cooperates in the defense thereof at Supplier’s expense.

The foregoing states the entire liability of supplier for infringement claims and actions, and purchaser hereby waives any rights that it might otherwise be entitled to in connection with the foregoing.

Supplier shall have no liability to Purchaser for any action or claim alleging infringement based upon any conduct involving: (1) the use of any good in a manner other than as specified by Supplier; (2) the use of any good in combination with other products, equipment, or devices not supplied by Supplier; or (3) the alteration, modification or customization of any good by any person other than Supplier, or by Supplier based on Purchaser’s specifications or otherwise at Purchaser’s direction (regardless of whether such alteration, modification or customization occurs before or after the good is originally shipped by Supplier to Purchaser). In the event of an infringement action or claim against Supplier which is based on any conduct described in the preceding sentence, Purchaser shall defend, indemnify and hold Supplier harmless against all damages, costs or expenses, including reasonable attorneys’ fees paid or incurred by Supplier in connection with such action or claim.

 

Tooling

If Purchaser pays for tooling, negatives or plates (collectively “Tooling”) then such Tooling will be the property of Purchaser and will be maintained free of charge by Supplier while being used in production and for twenty-four (24) months following the last date of use, after which the Tooling will be destroyed, unless otherwise agreed in writing. If the Purchaser does not pay for Tooling, then any such Tooling will be the property of Supplier. All artwork submitted by Purchaser is subject to the approval of the Supplier. Supplier will notify Purchaser of any additional charges for retouching or reworking and will bill Purchaser at cost for the same. On special orders Supplier reserves the right to ship not in excess of ten percent over or under the quantity ordered.

 

General

The invalidity or unenforceability (in whole or in part) of any provision, term or condition hereof, will not affect in any way the validity and enforceability of the remainder of such provision, term or condition, or any other provision, term or condition.

These Terms and Conditions may not be modified, terminated or repudiated, in whole or in part, except in a writing executed by the authorized representatives of Supplier and Purchaser. Supplier may, at its sole option, treat any attempted modification, termination, or repudiation to which it does not assent in writing, as a breach of these Terms and Conditions.

Upon any breach by Purchaser, or failure by Purchaser to comply with any of these Terms and Conditions, or if Purchaser becomes unable to conduct its normal business operations (including inability to meet its obligations as they mature), or if Purchaser becomes the subject of any proceeding under any state or federal bankruptcy law or other law, or makes any assignment for the benefit of creditors, Supplier will have the right to immediately cancel or terminate any and all agreements with or obligations to Purchaser relating to sales of the goods, in whole or in such part, which may result in the non­shipment or cancellation of Purchaser's pending or future order(s) and termination of Purchaser's relationship with Supplier, and to recover from Purchaser damages for breach and any unpaid installments due shall become immediately due and payable. All remedies in these Terms and Conditions will be cumulative, and not alternative or exclusive, and will be in addition to all other rights and remedies provided by applicable law. The exercise or failure to exercise any remedy by Supplier will not preclude the exercise of the same or other remedies under these Terms and Conditions. Supplier will not be deemed to have waived any provision of these Terms and Conditions or any breach by Purchaser of any provision hereof, unless specifically set forth in writing and executed by an authorized representative of Supplier. No such waiver by Supplier will constitute a waiver of such provision or breach on any other occasion.

Supplier shall not be responsible for any failure to fulfill its obligations hereunder due to causes beyond its reasonable control, including without limitation, acts or omissions of government or military authority, terrorist actions, acts of God, shortages of materials, transportation delays, fires, floods, labor disturbances, pandemics, riots or wars.

These Terms and Conditions, and the transactions contemplated hereby, will be governed by, construed and interpreted in accordance with the substantive laws of the Wisconsin (excluding the Convention on Contracts for the International Sale of Goods) without regard to its conflict of laws rules. Any legal action with respect to any such transaction must be commenced within one year and one day after the cause of action has accrued.

These Terms and Conditions, together with any quotation, order acceptance, or invoice subject to these Terms and Conditions, constitute the entire agreement and understanding of Supplier and Purchaser. No terms and conditions contained in any document submitted or proffered by Purchaser (including, but not limited to, any purchase orders) shall apply to any order or to the parties’ relationship generally and any and all such terms and conditions are expressly rejected by Supplier. Supplier assumes no liability except as expressly provided in these Terms and Conditions.

 

Disputes

Any and all disputes arising under or relating to these Terms and Conditions and the transactions contemplated hereby shall be determined exclusively by the state and federal courts found in Milwaukee, Wisconsin. Both parties acknowledge such courts have jurisdiction over them and any such disputes.

 

Ethics and Privacy Policies

Supplier has a global Code of Ethics Policy (the “Policy”), which governs the behavior and relationships between its employees and its customers, suppliers and distributors. The Policy can be viewed at www.bradyethics.com, under the Code of Conduct tab. If you believe that a Supplier employee’s conduct violates the terms of the Ethics Policy, please report the violation by using the confidential website (www.bradyethics.com), telephone number or fax line as outlined in the Ethics Policy. Any personal information submitted by Purchaser during any sale shall also be governed by the Privacy Policy, which can be reached by clicking on the "Privacy Policy" link located in the footer section of the site.